Chinese translation for "输出特性曲线"

output characteristic curve

Example Sentences:

	1.	Output characteristic curve 输出特性曲线
	2.	By experiment , the input - output characteristic of the liquid angular sensor is given 并通过实验，给出液体摆角传感器的输入?输出特性曲线。
	3.	Under the simulation environment of adams software , the model of the polishing machine was simulated . by the simulation , the curves of kinematic inputs and outputs were gained . those simulation results confirm on the feasibility of the scheme 应用三维建模软件pro / engineer完成抛光机总体模型的建立;应用adams软件对装置进行运动学仿真,得出系统的运动学输入、输出特性曲线,验证了抛光方案的可行性。
	4.	The capacitance offset averaging network is used in the distributed track - and - hold circuit block of the designed system . finally , according to the analysis on error effects in adc , the mathematics error model is simulated . furthermore , the input - output characteristics including input - 最后,基于对a / d转换器系统中误差的分析,对其误差数学模型进行了仿真,得到了包含延迟、限幅、谐波失真等误差的输入输出特性曲线。
	5.	Finally , some researches to improve the quality of figure formed by laser in screen are disscussed . a method to improve the responsing graph of mirror by fuzzy control is put forword . furthermore , anaysis to phenomema of distortion in laser show is introduced , relevently revising mothod is given too 最后，本文对如何提高激光大屏幕显示中图形质量进行了分析，提出通过模糊控制来改善振镜输出特性曲线的方法；另外，对激光扫描中出现的失真现象做了定量分析，并给出了校正方法，使激光扫描的图形更加逼真。
	6.	In the end , this thesis tests the resonator with three methods in case that it is both open looped and closed looped , and gets the results listed below : 1 taking 1 mhz frequency width ld as the light source , using current injecting frequency modulation method , the output characteristic of the resonator is got , which proves that the laser used in the lab can be used to modulate the frequency using current injecting frequency modulation 本文最后采用三种不同的方法对谐振式光纤陀螺进行了开环和闭环的实验测试，并取得了以下实验结果： 1 、用频宽1mhz的ld作光源，采用电流注入调频的方法，观测到了谐振腔的输出特性曲线。证明了实验采用的激光器可以通过注入电流的方法实现调频。
	7.	By studying the characteristics of the eddy displacement sensor , it adopts the control method which include using the fitting line of sensor ' s output characteristic curve in certain block as control characteristic curve , and stipulating door limit district and a certain of backward overshoot , the stabilization of welding torch is gained under the certain track precision 摘要通过对涡流式位移传感器的特性研究，采用以传感器输出特性曲线在一定区间内的拟合直线作为控制特性曲线、设定规定门限区和一定反向调节量的控制方法，得到了在保证一定的跟踪精度条件下的焊枪稳定。

Similar Words：

"输出速率" Chinese translation, "输出台" Chinese translation, "输出态" Chinese translation, "输出探测器" Chinese translation, "输出特性" Chinese translation, "输出提货单" Chinese translation, "输出提交" Chinese translation, "输出条支数" Chinese translation, "输出通道" Chinese translation, "输出通道, 外向信道" Chinese translation