| 1. | Process of normalizing and annealing of iron and steel
钢铁的正火与退火工艺 |
| 2. | Design of rapid thermal processing for ions implanted silicon
快速退火炉离子注入退火工艺设计 |
| 3. | A satificatory effect is obtained by rime annealing
采用再结晶退火工艺处理，可取得满意效果。 |
| 4. | Effect of annealing process parameters of x45nicrmo4 steel on hardness
4钢退火工艺参数对硬度的影响 |
| 5. | And a suggestion was made about proper softening annealing process
在此基础上，提出了合理的软化退火工艺。 |
| 6. | The results show that through batch annealing after cold rolling , the steels exhibit excellent drawability and enamel ability
因此综合考虑，采用罩式退火工艺可实现成型性能和贮氢性能的良好匹配。 |
| 7. | The main work is as the follows : 1 . perovskite batio3 thin films are grown on sio2 / si ( 111 ) substrates by sol - gel process and rapid thermal annealing ( rta ) technique
主要工作如下: 1 .用溶胶-凝胶法和快速退火工艺在sio2 / si ( 111 )基片上生长了钙钛矿结构batio3薄膜。 |
| 8. | The effects of batch annealing ( ba ) and continuous annealing ( ca ) on mechanical properties and hydrogen storage property of ultra - low - carbon enamelled steels were investigated
摘要研究了两种不同退火工艺罩式退火和连续退火工艺对含钛超低碳搪瓷钢板成型性能和贮氢性能的影响。 |
| 9. | Zn0 . 6 ni0 . 4 fe2o4 soft ferrite has been prepared by shs in his paper . the sem and xrd has been studied for zno . 6 ni0 . 4 fe2o4 annealed in different temperature and time
通过对比退火产物的xrd和sem图谱，确定了最佳的退火工艺： 300 h的升温速率到1100 ，保温2h ，随炉冷却到室温。 |
| 10. | The effects of baking temperature , baking time and prestrain on the bake hardenability and dent resistance of isotropic sheet steel and bh sheet steel produced by batch annealing were studied
摘要研究了烘烤温度、烘烤时间和预拉伸应变量对罩式炉退火工艺生产的各向同性钢的烘烤硬化性的影响，并与力学性能相当的冷轧烘烤硬化钢进行了对比。 |
