Chinese translation for "送丝速度"

wire feed rate
wire feed speed

Related Translations:

送:  动词1.(运送; 传送) deliver; carry 短语和例子送报 deliver newspaper; 送医送药上门 deliver medical care right to the patient's home; 你自己把这些货物带走还是由我们送到你家里去? will you take the goods with you or shall we deliver

Example Sentences:

	1.	Uniform and stable wire feeding speed which ensures fast and reliable ignition 送丝速度一致、平稳,保证起弧快捷、可靠。
	2.	Wire feed speed 送丝速度
	3.	Wire feed rate 送丝速度
	4.	In the closed loop , the information is transmitted to dsp from mcu and compared to the feedback data . then , the result would be transmitted back to the mcu for adjusting the wfs , voltage and so on to the setting values 采用闭环控制系统,将这些参数与反馈的数据比较、计算后,再通过da输出来调整和控制送丝速度,焊接电压等,使其保持在设定值。
	5.	Through the man - machine interaction system which consisted of lcd ( liquid crystal display ) and keyboards , we can select welding parameters , such as the way of welding , diameter of the wire , wire feed speed , current , voltage and so on 主要过程是:通过lcd ( liquidcrystaldisplay )与键盘组成的人机交互系统选择已存储在单片机flash中的焊接参数,包括焊接方法、焊丝直径、送丝速度、焊接电流、焊接电压等。
	6.	Using the traits of arc adjust itself of the co _ 2 welding , adopting slow - descending feature or even feature of electrical source equipping with system that delivering the welding rod at the invariable speed , then , the arc burning steadily is realized , and the quality of welding is improved 利用co _ 2气体保护焊电弧的自身调节特性,采用缓降或平硬特性的电源配等速送丝系统,通过改变电源空载电压来调节电弧电压,再利用电弧电压和熔化速度之间的关系调节焊丝熔化速度使之等于送丝速度,最终实现电弧的稳定燃烧。
	7.	Transitional feature of the arc and metal droplet in the welding process with steam shielded arc is investigated by means of analysing the waveforms of welding voltage and current under different welding regimes and it is found that there are two types of arc process behavor ? " arc starting - arc blowing out - short - circuiting " and " arc - starting - short - circuiting " . under the condition of constant diameter of welding wire and its feeding speed , the arc process behavor can be changed by adjusting the inductance of welding circuit as well as the voltage of power supply . if arc process behaves as alternative process of " arc starting - arc blowing out - short - circuiting " with minimum time duration of arc blowing out and maximum frequency of short - circuit transition , the welding process will be stable with less spatter and smooth weld bead 通过分析不同焊接规范下的焊接电压和电流的波形.研究了水蒸气保护下电弧及熔滴过渡的特点，发现其电弧过程行为有“燃弧?熄弧?短路”和“燃弧?短路”两种形式.在焊丝直径和送丝速度一定的情况下，通过调节焊接回路中的电感量和电源电压，可以改变电弧的过程行为形式.若电弧过程呈“燃弧?熄弧?短路”交替进行，并且熄弧时间最短时，短路过渡频率最高，在这种情况下，飞溅小，焊道成型好，焊接过程稳定

Similar Words：

"送丝机" Chinese translation, "送丝机构" Chinese translation, "送丝轮" Chinese translation, "送丝器" Chinese translation, "送丝器 送丝装置 送线器" Chinese translation, "送丝速度控制" Chinese translation, "送丝筒管" Chinese translation, "送丝系统" Chinese translation, "送丝装置" Chinese translation, "送死" Chinese translation