Chinese translation for "速度特性"

speed characteristic
speed performance
velocity characteristic

Example Sentences:

	1.	Simulation calculation of the matching of fuel injection system and diesel engine on speed characteristics 在速度特性上喷油调节系统与柴油机匹配的模拟计算
	2.	It is the pure problems being designed for hydraulic operating mechanism that is discussed both in aspects of action time and velocity characteristics 从液压的动作时间和输出速度特性分析等方面探讨了液压操动机构在工程设计上的理论问题。
	3.	Reecat company adapts dc - power test system , go on speed performance test , load test , heat circulation test , durability test . use in motorcycle matching test , catalyst performance aging test 利凯特使用的是直流电力测功机系统，可进行速度特性试验负荷特性试验热磨合循环试验强化耐久试验，主要用于摩托车匹配试验和催化剂性能及老化试验。
	4.	Meanwhile , considering of accuracy , complexity and speed , a 6 + 4 segmented architecture is presented . to enhance the speed performance and reduce error and area of dac , the 6 msbs are thermometer - decoded , and the 4 lsbs are binary - weighted 同时,考虑到数模转换器的精度、复杂性和速度特性,决定采用电流舵型结构,确定了6 + 4的分段式译码方式。
	5.	Reecat company adapts dc - power test system , go on speed performance test , load test , heat circulation test , durability test . use in motorcycle matching test , catalyst performance & aging test 利凯特使用的是直流电力测功机系统，可进行速度特性试验、负荷特性试验、热磨合循环试验、强化耐久试验，主要用于摩托车匹配试验和催化剂性能及老化试验。
	6.	By the matlab ' s program and theoretic analysis , the paper computed and simulated the outer performance of the front and rear shock absorbers in the xiali automobile and the ford / iveco damper , and compared the theoretical values with the test results 文章通过理论分析和matlab模拟计算所得出的夏利汽车前、后减振器和ford iveco减振器的速度特性曲线和示功图，与其试验结果基本吻合。它表明，理论计算结果是可信的，所建立的数学模型是正确的。
	7.	On the base of the working model , the full load characteristics at 1600r / min , 2000r / min and 2200r / min are respectively simulated , and the speed characteristics are also simulated . the simulated values are contrasted with the tested values at the same operating condition . the results show the correspondence of the calculated values with tested values 利用柴油机的工作过程模型，对转速分别在1600r min 、 2000r min 、 2200r min的负荷特性及全负荷下的速度特性进行了模拟计算，并与相应工况的试验数据进行对比，结果表明，模拟数据与试验数据能较好的吻合，从而验证了该机工作过程模型的正确性。
	8.	Second , engine ' s partial velocity characteristics model and universal characteristics model are built the throttle opening is considered as an essential factor to build the model for reflecting the actual working performance of engine . the situation of the throttle opening change is studied , and a simulation method is given to use torque curved surface and vehicle dynamics equation on base of differential approach method . engine test software is developed for the engine no - load test , variable throttle opening test and throttle step change test 其次，建立了发动机的部分速度特性模型和万有特性模型；为了更好的反映发动机的实际工作特性，将油门开度作为一个重要参数参与建模，并对发动机变油门的情况进行了研究；结合转矩曲面和整车动力学方程，采用微区间逼近法确定了发动机变油门过程仿真方法；开发了发动机试验测控软件，利用该软件进行了发动机空载响应试验、发动机不同油门开度试验和油门阶跃变化试验，并对实际试验数据和数学模型计算数据进行对比；在vc + +平台上开发了发动机特性仿真模块，在系统中用软件实现了变油门控制发动机特性的功能。
	9.	For the research of the damping control strategy one type of controllable damper , magnetico - rheological ( mr ) damper , was constructed and tested , the damping force and displacement characteristic curves , the damping force and velocity characteristic curves are obtained , so that the damping force and voltage ( current ) model , or the damping coefficient and voltage ( current ) model can be further obtained 通过特性试验，得到示功特性、速度特性，经转换得到阻尼器的阻尼力? ?电压(电流)模型和阻尼系数? ?电压(电流)模型。这样在研究中，可以采用开环控制方式或力反馈控制方式实现阻尼力的控制。
	10.	The paper summarizes the development of the control technology of paver ' s vehicle system ; discusses the feasibility of the plc application to vehicle system ; calculates and examines the working resistance and power of the control system as well some concerning parameters of the hydraulic system ; builds the driving system velocity characteristic ; accomplishes the hardware design and the software design according to the functional requirements of vehicle system and the features of plc ; adds the pid compensation to the closed circuit velocity control ; sums up the mathematic model of hydraulic pump - motor system and defines the controller parameters ; in the end , the simple dynamic simulation basing on the control system model and the simulative test are carried out to testify the reasonableness and the feasibility of the designed plc control system 本文总结了摊铺机行驶控制技术的发展，讨论了plc应用于行驶系统的可行性；计算和校验了控制系统工作阻力、功率及液压系统有关参数；建立了行驶驱动系统的速度特性；结合行驶系统的功能要求及plc的特点，完成了控制系统的硬件设计和软件设计；对其速度闭环控制，引入了pid校正环节；归纳了液压泵?马达系统的数学模型，确定了控制器的控制参数；最后对控制系统模型进行了简单的动态仿真和plc模拟试验，初步证实了控制系统设计的可行性和合理件。

Similar Words：

"速度锁定" Chinese translation, "速度锁定标志" Chinese translation, "速度太快" Chinese translation, "速度太快（太慢）（突然停下）" Chinese translation, "速度探测器；车速探示器" Chinese translation, "速度特性曲线" Chinese translation, "速度梯度" Chinese translation, "速度梯度 速度勾配" Chinese translation, "速度梯度区" Chinese translation, "速度梯度张量" Chinese translation