| 1. | Check the clamping force in relation to the part geometry
检查锁模力与制品几何关系 |
| 2. | As the mould heats up , it expands , increasing the clamping force
随着被加热，模具膨胀，锁模力增加。 |
| 3. | Adjust clamping force
调整锁模力 |
| 4. | In using an injection moulding machine , it is best to use the minimal but adequate clamping force f
使用注射成型机，最好使用最小同时充足的锁模力f 。 |
| 5. | An adequate clamping force holds the mould halves together against the cavity pressure during the injection phase
适度的锁模力在注射阶段能够克服型腔压力锁紧两个半模。 |
| 6. | An excessive clamping force distorts the mould and the mould cavity unnecessarily , affecting the precision of the moulded part
过大的锁模力会使模具以及模腔产生不必要的变形，影响成型品的精度。 |
| 7. | The solution is to attach a device to measure the clamping force and to control the clamping force to within a tolerance as mould temperature changes
解决办法是安装一个装置在模具温度改变时去测量锁模力并且将其控制在一个公差范围内。 |
| 8. | Hydraulic pressure model in direct molmerged , simple in structure , convenient in mold adjustment , and the force of clamoping can be easy adjusted , data can be read directly
液压式直接合模结构简单，调模方便，并且锁模力易于调整，数值易于直读。 |
| 9. | When the pressure inside the mold cavity is too great , the mold opening force is greater than its clamping force . then , the mold will be forced to open and cause burr overflow
当塑料在模腔内的压力太大，其分模力大于锁模力，因而迫开工模，就会产生毛边。 |
| 10. | Its main products comprise more than 30 types of plasts injection moulding machines with clamoing forces from 50 to 5000 electric tons ( injection capacity from 100g to 2500g )
主要产品是锁模力从50吨到500吨，注射量从100克到2500克三十余种规格的塑料注射成型机。 |
