Chinese translation for "闭模"
|
- clamp close
mold closing
Related Translations:
闭集: [数学] closed set; topologically closed set 气闭: airmassclosed qiqi blockageqi-stagnant dysuria 箝闭: impactionincarceration
- Example Sentences:
| 1. | This operation provides positive opening and closing action, thereby reducing "flash" on the grids .
这种操作具有良好的开模和闭模作用，因而减少了板栅上的“毛刺”。 | | 2. | This operation provides positive opening and closing action thereby reducing "flash" on the grids .
这种操作起到了良好的开模和闭模作用，因而减少了板栅上的“毛刺”。 | | 3. | Steel closed die forgings - general technical delivery conditions
闭模锻造的钢锻件.通用交货技术条件 | | 4. | Die blocks for closed - die hammer forging
闭模锤锻用模块 | | 5. | Closed die forging
闭模锻造 | | 6. | This operation provides positive opening and closing action , thereby reducing " flash " on the grids
这种操作具有良好的开模和闭模作用，因而减少了板栅上的“毛刺” 。 | | 7. | This operation provides positive opening and closing action thereby reducing " flash " on the grids
这种操作起到了良好的开模和闭模作用，因而减少了板栅上的“毛刺” 。 | | 8. | Dimensional uniformity of closed - die forgings results in positive control of critical wall thickness , eliminating deficiencies caused by shifted cores in castings
闭模锻造的尺寸一致性造成关键壁厚的完全控制，避免了铸造工艺中铁心移位造成的缺陷。 | | 9. | This paper applied the character that linear subjective isometries preserve the geometric rank of a operator to characterize the onto isometries between compact operators space in weakly closed modules of nest algebras , and obtained the expressions of the isomtries
摘要利用算子的几何秩在线性等距映射下不变的性质研究了套代数弱闭模中紧算子空间的线性等距离映射，最后得到其空间实现形式。 | | 10. | According to the special shape and operate requirements of the torpedo , the structure and moulding process of the torpedo shell are established , in which the body and overlay block with grooves are moulded by fiber winding , and close moulding respectively with the adhesive by limited stop compression . in the light of the selection of raw material system , composite system with outstanding performance are defined , based on which the mechanical properties are tested . , with the overall consideration of structural characters and design demands , the main factors which may have effects on the strength and stability ( including stiffness section dimension , stiffeners space , skin thickness and skin lay angle ) is optimized one by one for the structure design parameters on the base of the fem model of skin , stiffness and layover block by fem . . as a result , the prototype with 1 : 1 proportion and its structure and lay optimization design are completed . the moulding technology for polyurethane foam moulding the stiffened shell is obtai ned in terms of the design , manufacture moulding , experimental mould and tooling
依据在研产品特殊的外型结构和使用要求，确定了该型号水雷复合材料壳体的具体结构形式和复合成型工艺路线，即由纤维缠绕工艺成型主体异形件，闭模成型带通槽外贴块，用限位加压工装实现粘接的工艺路线；通过对原材料体系的筛选，确定了综合性能较好的复合材料体系，以此为基础进行了力学性能测试；运用有限元方法，建立了蒙皮、筋条和外贴块的分析模型，综合考虑结构特点和设计要求，对影响结构强度与稳定性的主要因素(包括筋截面尺寸、筋间距、蒙皮厚度、蒙皮铺层角度)分别进行了结构设计参数的优选，最终完成了复合材料异形耐外压壳体1 : 1样件和缩比实验件结构及铺层优化设计；完成了聚氨酯泡沫胎成型内置加筋壳体的成型工艺技术研究；对缩比件进行外压性能测试，并给出了应力、应变测试结果。 |
- Similar Words：
- "闭门聆讯" Chinese translation, "闭门聆讯有关申请" Chinese translation, "闭密性" Chinese translation, "闭皿闪点试验" Chinese translation, "闭皿试验器" Chinese translation, "闭模爆炸成形工艺" Chinese translation, "闭模成形" Chinese translation, "闭模定径" Chinese translation, "闭模锻造" Chinese translation, "闭模锻造力学" Chinese translation
|
|
|
