| 1. | Oil pressure atomizing nozzles . minimum requirements . testing
油压雾化喷嘴.最低要求.试验 |
| 2. | Experimental studies on the spray characteristics of effervescent atomizers
气泡雾化喷嘴雾化特性实验 |
| 3. | Experimental research on the flow characteristics of an air atomizing spray nozzle
气动旋流雾化喷嘴流动特性 |
| 4. | Specification for oil pressure atomizing nozzles - minimum requirements - testing
油压力雾化喷嘴.最低要求.试验 |
| 5. | Oil pressure atomizing nozzles - determination of the angle and spray characteristics
油压雾化喷嘴.角度和喷射特性的测定 |
| 6. | Numerical simulation of the flow field in eddy pressure nozzles for wet - type desulfurization
撞击流湿法脱硫雾化喷嘴内流场数值模拟 |
| 7. | Effect of exit structure on the separation performance of the guide vane cyclone tube
气泡发生结构对二级燃油雾化喷嘴性能影响的实验研究 |
| 8. | Influences of air liquid mass flow rate on spray combustion produced by effervescent atomizer
气液质量流量比对气泡雾化喷嘴燃烧特性的影响 |
| 9. | Using swirl atomizer designed by this paper , kerosene was injected into the ejector combustor , and achieved steady combustion . this made a solid foundation for the future study on combustion organization
设计了旋流式雾化喷嘴，实现了煤油在引射火箭模态中的稳定燃烧，为进一步的燃烧组织研究奠定了基础。 |
| 10. | Experiment shows that when the gas hydrate is obtained by spray , its induction time is generally shorter , its phenomenon is not obvious , setting of initial temperature and pressure with an autoclave has certain influence on induction time , but not obvious , water resources and spray nozzle have bigger influence on the induction time
试验表明，喷雾方式制取天然气水合物时，诱导时间普遍较短，诱导现象不明显；反应釜设定初始温度和压力对诱导时间有一定影响，但不是很明显；水源和雾化喷嘴对诱导时间的影响较大。 |
