| 1. | Non - destructive testing of steel forgings - ultrasonic testing of ferritic or martensitic steel forgings
钢锻件无损检验.铁素体或马氏体钢锻件超声检验 |
| 2. | Non - destructive testing of steel forgings . part 3 : ultrasonic testing of ferritic or martensitic steel forgings
钢锻件的无损检验.第3部分:铁素体或马氏体钢锻件的超声波检验 |
| 3. | Especially the polymer by ion beam processing exceeds martensite steel in the surface hardness
特别是其表面硬度远高于目前公认的最硬的马氏体钢，其耐磨性明显优于滚珠轴承钢。 |
| 4. | Mossbauer spectrum study on the microstructures of cobalt - free superhigh strength high fracture toughness steel during tempering process
超高强高韧马氏体钢回火微观结构的穆斯堡尔谱 |
| 5. | Steel forgings for pressure purposes - part 2 : ferritic and martensitic steels with specified elevated temperature properties
压力容器用钢锻件.第2部分:规定高温性能的铁素体和马氏体钢 |
| 6. | Non - destructive testing of steel forgings - part 3 : ultrasonic testing of ferritic or martensitic steel forgings ; german version en 10228 - 3 : 1998
钢锻件的无损检验.第3部分:铁素体或马氏体钢锻件的超 |
| 7. | Standard test methods for chemical analysis of stainless , heat - resisting , maraging , and other similar chromium - nickel - iron alloys
不锈钢耐热钢马氏体钢和其它类似的铬镍铁合金化学分析的标准试验方法 |
| 8. | Standard specification for steel castings , ferritic and martensitic , for pressure - containing and other applications , for low - temperature service
低温承压设备及其它设备用铁素体和马氏体钢铸件标准规范 |
| 9. | 4 when joining two different ferritic steels , or when joining ferritic to martensitic steels , the filler metal shall conform to the nominal chemistry of either base metal
两种不同铁素体钢或铁素体钢与马氏体钢之间的焊接，填充金属应符合任一母材金属的标称化学组成。 |
| 10. | The hydrogen permeation experiment of manet ii with hot dipping aluminized coating was performed in temperature range of 300 to 450 , in gas phase and in liquid pb - 17li phase
在300 450温度范围内，分别在氢气相和液态铅锂合金相中开展了带热浸铝涂层manet马氏体钢的氢渗透性能研究。 |
