| 1. | Monitoring longitudinal vehicular velocity by using driving wheels information
基于驱动信号的加速车身速度算法 |
| 2. | Signals with multiple drivers
重复的驱动信号 |
| 3. | In addition , we analyse the dead time effects of pwm control on the output waveform
另外还分析了逆变桥上下管驱动信号上的死区对输出电压波形的影响。 |
| 4. | The tft lcm driver signals were enable signal and fiducial clock signal , which were strict with synchronization
驱动信号主要为使能信号和基准时钟信号,并要求二者具有严格的同步性。 |
| 5. | A lock - in amplifier is used to supply the driving signal and to detect the output signal corresponding to the sample ' s strain
使用锁相放大器提供驱动信号，并同时检测对应于样品形变的输出信号。 |
| 6. | The guard pathways of the matrix cards extend driven guard of the smus to the duts to eliminate the effects of leakage current
矩阵卡的保护通路将smu的驱动信号延伸到了dut ，消除了漏泄电流的影响。 |
| 7. | Then , control and output circuit make certain that all actions of control signals , driver signals and output signals are true
控制和输出电路确保各个控制信号、驱动信号、输出信号的动作准确,实现芯片的丰富功能。 |
| 8. | In the course of researching , we advance and design a on - chip control signals generator based on fpa , and obtain correct simulated result
在研究过程中，我们提出并设计了一种面阵读出电路的片上驱动信号发生器电路，且得到正确的仿真结果。 |
| 9. | The effect of electrostatic force of the drive voltage on the accelerometer had been researched when the bias voltage polarity is positive - negative configuration
前人在研究驱动信号对传感器的静电力效应时，用偏置电压极性为正?负配置的驱动信号进行研究。 |
| 10. | The inverter drive signals are synchronized with the position sensor output signals so that synchronism between the stator winding currents and the rotor flux is ensured for any speed
逆变器的驱动信号与转子位置信号同步从而保证在任意的速度下定子绕组电流与转子磁场同步。 |
