Chinese translation for "齿高"

depth of tooth; height of tooth; length of tooth; tooth depth

Example Sentences:

	1.	The helical gear transmission with inconstant ademdrum 变齿高螺旋齿轮传动
	2.	Mean measuring depth 中点测量齿高
	3.	Constant cord height 固定弦齿高
	4.	Contact depth of tooth 接触齿高
	5.	Full - depth teeth 全齿高齿
	6.	The outside diameter of copper tube shall be tested by micrometer . the tooth depth and the bottom wall thickness shall be tested by microscope 外径尺寸用外径千分尺测量.齿高和底壁厚用双目倒置小金相测量。
	7.	4 . the effects of geometrical parameters of microfin tubes on the in - tube boiling heat transfer coefficients is analyzed . in addition , the principles on intensifying heat transfer in microfin tube is also analyzed 对r290和r404a ，通过研究koyama和thome关联式，分析了内螺纹管齿高、螺旋角等齿型参数对工质沸腾换热性能的影响。
	8.	After thoroughly analyzing the influence of each pump parameters on the gear pump performance , the paper developes the criterion for optimum gear parameters , which can be utilizied in practice easily for gear manufacturing using normal involute gear hob with two - fillet type . the conclutions studied by the paper are : 1 . both the addendum coefficient and the deddendum coefficient of the pump gear should be 1 . 125 以目前国内普遍使用的双圆弧头全齿高为2 . 5倍模数渐开线标准滚刀作为泵齿轮的加工刀具，通过对齿轮加工原理的分析，提出了欲使泵齿轮参数达到最佳，泵齿轮的齿顶高系数和齿根高系数都为1 . 125 ；对变位系数的确定应考虑到泵齿轮的根切、齿顶厚、重合度以及侧隙因素；泵齿轮为避免过渡曲线干涉，必然要存在根切现象。
	9.	As a new type gear transmission , double circular arc profile bevel gearing carries out its transmission by means of meshing between convex - concave tooth profile in both of the direction of tooth trace and the direction of tooth depth , so it has advantage of high load capacity , long service life , easy forming hydrodynamic oil film between teeth as well as high quality of running - in etc . therefore , more attention has been paid to its application and research in recent years 作为一种新型齿轮传动方式，双圆弧弧齿锥齿轮传动不论在齿线方向、还是在齿高方向，均为凸、凹齿廓相啮合，因而它比一般的弧齿锥齿轮传动的承载能力高，使用寿命长；并且在啮合过程中两齿面间容易形成润滑油膜，具有良好的跑合性能，所以对它的应用和研究日益受到人们的重视。
	10.	( 3 ) quadrature experiment consisted of four experimental factors including dental angle , space between dental structure , dental height and the depth of flow passage of dentate , any one of which has four different values . how these dental structural parameters affected hydraulic performance of dentate emitters was studied ( 3 )以齿形流道结构中齿角度、齿间距、齿高、流道深度为实验因素，每个因素选用4个水平，进行正交实验，研究了齿形流道结构参数对滴头水力性能的影响。

Similar Words：

"齿杆升降机" Chinese translation, "齿杆式自装饲料拖车" Chinese translation, "齿杆式作物装载机" Chinese translation, "齿杆套" Chinese translation, "齿刚毛" Chinese translation, "齿高变位量" Chinese translation, "齿高规" Chinese translation, "齿高收缩" Chinese translation, "齿高修形" Chinese translation, "齿割面" Chinese translation