English translation for "导通角"

angle of current flow
angle of flow
conduction angle
conductionangle

Example Sentences:

	1.	Thyristor operating angle 可控硅导通角
	2.	Power factor characteristics of the rectifier is introduced , and control methods for the conduction angles are analyzed 摘要介绍了整流装置的功率因数的特点，分析了导通角的控制方法。
	3.	Methods are explored to improve power factors of ion membrane of the rectifying device through control of the conduction angles 探讨了通过对导通角的控制来提高离子膜整流装置功率因数的方法。
	4.	When a new clean ac power supply is designed , it is very necessary to know the relationship between the equivalent induction and the thyristor turn - on angle 在设计新型交流净化电源时，掌握等效电感和双向晶闸管延迟导通角之间的关系很重要。
	5.	The fuzzy logic controller designed in this study determines the required angular used in the dc chopper control based on motor speed error and its change 设计的模糊控制器以电机的转速偏差及转速偏差率为输入，输出量用于控制斩波调速时的导通角。
	6.	When the conduction angles are controued at 135 ~ 140 , power factors of the rectifying transformer can be controlled in the rage of 0 . 91 ~ 0 . 94 根据系统电压的变化及时调整整流变压器的档位，当控制导通角135 ~ 140时，可以将整流变压器的功率因数控制在0 . 91 ~ 0 . 94 。
	7.	The fcl operates in two modes , in normal conditions , it is used as a compensation capacitor ; in fault conditions , the gto pair quickly switches on to get the by - pass reactor in operation to limit the current 正常情况下，由电容和限流电感对线路进行串联补偿，发生故障时，根据短路电流的大小控制gto的导通角，从而改变投入的限流电抗，达到限流目的。
	8.	Dissertation explains the theory and characteristices of switched reluctance motor based on its idealy linear math mode . analyseing and researching on control characteristic , control parameters , control strategy and their relationship , thesis designed hardware circuit and software of control system based on the strategy . dissertation discussed the transform function of system and illustrates it is essential to chang parameters in the pid control arithmetic , estimating parameters for the digital pid controller primarily , dissertation also researched on the exciting and protection of igbt 论文以开关磁阻电动机的理想线性数学模型为理论基础，对其原理特性进行了说明，对开关磁阻电动机的控制特性(转速、转矩) 、可控参数(导通角、关断角、相电流、绕组端电压)与控制策略(电流斩波、电压斩波、角度位置控制等)及它们之间的关系进行了研究和分析。

Similar Words：

"导通电阻" English translation, "导通故障信号" English translation, "导通检验发送接收器" English translation, "导通检验请求" English translation, "导通检验转发器" English translation, "导通孔" English translation, "导通期间" English translation, "导通区域" English translation, "导通特性" English translation, "导通校验请求信号" English translation