Mobile
Log In Sign Up
Home > english-chinese > "啮合特性" in Chinese

Chinese translation for "啮合特性"

eingriffsverhalten engagement behavior

Related Translations:
啮合机构:  engaging mechanism
啮合干涉:  meshing interference
啮合端:  end of engagementengaging end
脱离啮合:  demeshingthrow out of gearthrow out of meshungear
啮合时限:  gear-meshing time limit
蜗杆啮合:  worm meshingworm toothing
啮合调节器:  engagement controller
啮合电磁铁:  clutch electromagnetclutch magnet
不啮合:  not in meshout-of-gear
啮合尺寸:  eingriffsgre engagement index
Example Sentences:
1.Analyze the scm ' s structure and its meshing characteristics systematically
系统分析了空间凸轮机构结构及啮合特性
2.The paper studies the surface geometry of globoidal indexing cam by applying the theory of conjugate surfaces and the method of coordinate transformation , presents the equations related to the main inducement curvature of the cam profiles , analysis and deduces the equations of two circumscription curves , which judge if the conjugate surface could mesh properly . some calculate examples and conclusion are given . the surface equation of the globoidal cam and conjugate equation are established
论文首先在分析空间啮合原理基础上,采用坐标变换法推导出弧面分度凸轮的工作廓面方程、啮合方程和压力角计算公式,对弧面分度凸轮的啮合特性进行了深入的分析和研究,对判断曲面能否正确啮合的依据如两类界限线方程以及诱导主曲率等进行推导,并给出算例。
3.Through systemic analyzing on spiral helical gear transmission with different basic parameters , the essay found out rules of how can such basic parameters influence spiral helical gear engagement characteristics . so it brings forward the auxiliary assembling mode of adopting one straight gear and one helical gear on condition of little axial angle as well as treasures to ameliorate ill engagement performance on condition of large axial angle , another two jobs of the essay are to clarify the wrong concept that spiral helical gear can only transmit movement but not impetus and to provide a brief and practical method of analyzing contact for gear pairs whose surface equations can be written out directly
通过对不同基本参数的螺旋齿轮传动进行系统研究,找出了螺旋齿轮基本参数对其啮合特性的影响规律,提出小轴交角条件下可采用一直齿轮、一斜齿轮的齿轮副组合方式,给出了大轴交角条件下啮合性能不良的改进措施。澄清了螺旋齿轮只能传递运动不能传递动力的误区,为能够直接写出齿面方程的齿轮副进行齿面接触分析提供了一种简便、实用的新方法。
4.Focusing on the spatial cam mechanism ( scm ) , the dissertation , starting with the practical processing and the characteristics of the structure and meshing , detailedly analyzes and experiments research the structure theory , processing error and , one - side process and profile inspection of scm with spatial meshing principle and rotating transformation matrix operator methods
本文以空间凸轮机构为研究对象,从工程实际出发,以空间啮合原理和旋转变换矩阵为工具,从结构特点、啮合特性入手,对空间凸轮机构的结构设计、加工误差、单侧面加工工艺及廓面检测技术进行了深入地理论分析和实验研究。
5.Based on the analysis and discussion of characteristics and law of gear engagement under condition of elasto - hydrodynamic , a calculation method on sliding and rolling work loss of standard spur gear transmission had been put forward , and the relationship of geometric parameters and overlapping coefficients of gear with sliding work loss was revealed
摘要基于弹流润滑状态下的齿轮啮合特性及规律分析和讨论,提出了标准直齿传动的滑动功损及滚动功损的计算方法,揭示了齿轮的几何参数和重迭系数与滑动功损的关系。
6.Tooth surface equations and contact line equations of the involute worm gearing are established according to its machining methodology . meshing characteristics in rigidity condition are studied . these characters include the inductive normal curvature along the contact line on the worm surface , the first and the second limit lines during the engage of the worm gear , and the influence of the intersect angle between the contact line the relative velocity of the worm and the gear on transmission performance
根据渐开线圆柱蜗杆传动的创成方法,建立了渐开线圆柱蜗杆和蜗轮的接触线方程式、齿面方程式,分析了渐开线圆柱蜗杆传动的刚性啮合特性,如蜗杆与蜗轮啮合时的诱导法曲率、一类界限曲线、二类界限曲线和蜗杆与蜗轮间相对速度方向和接触线方向的夹角对传动性能的影响; 2
7.Firstly , based on research of the asymmetric involute gear cutter and the gearing theories , the universal tooth flank curve equations of asymmetric gear with two pressure angles and the tooth transmission curve are derived by the gear shape nomal method , then the fea model of asymmetric involute gear with main parameters is automatically generated with ansys parametric design language ( apdl )
本文首先建立非对称渐开线刀具的方程,根据齿形法线法建立非对称渐开线齿轮的齿廓曲线方程,并利用apdl参数化建模语言建立全参数的非对称渐开线齿轮有限元模型。讨论了非对称渐开线齿轮的啮合特性,对非对称渐开线齿轮传动特点作了详细的分析。
Similar Words:
"啮合时间" Chinese translation, "啮合时限" Chinese translation, "啮合试验" Chinese translation, "啮合手柄" Chinese translation, "啮合套" Chinese translation, "啮合条件" Chinese translation, "啮合网络;纲目网络" Chinese translation, "啮合位置" Chinese translation, "啮合误差" Chinese translation, "啮合系数" Chinese translation