Chinese translation for "啮合位置"
|
- position of engagement
Related Translations:
啮合干涉: meshing interference 啮合端: end of engagementengaging end 脱离啮合: demeshingthrow out of gearthrow out of meshungear 啮合时限: gear-meshing time limit 蜗杆啮合: worm meshingworm toothing 啮合调节器: engagement controller 啮合特性: eingriffsverhalten engagement behavior 啮合电磁铁: clutch electromagnetclutch magnet 不啮合: not in meshout-of-gear
- Example Sentences:
| 1. | The research on the flash temperature is made by finite element methods . the distribution of the flash temperature on tooth surface is obtained
在齿面温升的有限元分析中，利用ansys软件，分析了在不同啮合位置处面齿轮齿面的温度场。 | | 2. | 5 、 as adding the friction of the spiral bevel gear , the variety of the contact stress of teeth surface and the bending stress of teeth root vs the different meshing position are presented
5 、初步探讨了考虑干摩擦的情况下,螺旋锥齿轮副动态啮合过程中齿面接触应力及齿根弯曲应力随啮合位置变化的规律。 | | 3. | The distribution of the bend stress of fg has been gotten . the investigation on the contact stress of fg drive is made by fea . the distribution of the contact stress of fg is obtained in the different meshing locations during the meshing
在面齿轮传动的接触应力的研究中,利用有限元分析法对面齿轮的接触应力作了分析;获得了在啮合过程中不同的啮合位置面齿轮的接触应力的分布规律。 | | 4. | 3 , during the process of the gear teeth meshing , the film shape and pressure distribution have little difference . but , the temperatures have the distinctive changes as the engaged position is varied , which means that the temperatures as the increase in the rate of slide to roll
3 、在齿轮传动啮合过程中，压力分布和油膜形状无明显变化，但温升随啮合位置的不同呈显著变化，即温升随着滑滚比增大而增大;在单、双齿啮合交替处，摩擦系数达到极值，可达0 . 08 。 | | 5. | 4 、 on the basis of analyse of a quasi - static meshing simulation in a meshing period , a dynamic meshing simulation in the case of definite torque and rotary speed are carried out in a meshing period . the numerical results which indicating the variety of the contact status , the contact stress , the bending stress in the location of teeth root and the torque and rotary speed of gear pair vs the different meshing position are presented
4 、在对螺旋锥齿轮准静态啮合进行仿真分析的基础上,进行了螺旋锥齿轮动态瞬态啮合仿真分析,重点分析带载启动时出现的冲击现象,得出了齿轮的接触状态、接触应力、齿根弯曲应力及主从动齿轮的扭矩、转速和加速度随啮合位置变化的规律。 | | 6. | 3 、 based on the model , a quasi - static meshing simulation is carried out in a meshing period . the numerical results which indicating the variety of the contact status , the contact stress , the bending stress in the location of teeth root and the torque and rotary speed of gear pair vs . the different meshing position are presented , and the rationality of the model is be verified
3 、基于所建有限元分析模型,在一个啮合周期内,对齿轮副进行准静态啮合仿真分析,给出了准静态啮合时齿轮的接触状态、接触应力、齿根弯曲应力及主从动齿轮的扭矩和转速随啮合位置变化的规律,验证了所建模型的正确性。 |
- Similar Words：
- "啮合手柄" Chinese translation, "啮合套" Chinese translation, "啮合特性" Chinese translation, "啮合条件" Chinese translation, "啮合网络；纲目网络" Chinese translation, "啮合误差" Chinese translation, "啮合系数" Chinese translation, "啮合线" Chinese translation, "啮合线长度" Chinese translation, "啮合销" Chinese translation
|
|
|
