Chinese translation for "平面尺寸"

plan view size
plastic bin

Related Translations:

尺寸:  (长短大小) measurement; dimensions; size; magnitude; measure; admeasurement; bigness; fitting 短语和例子衣服尺寸 measurements of a garment; 加工尺寸 finish size; 量尺寸 take sb.'s measurements; (鞋、帽、衣等)现货尺寸 s

平面:  plane; two dimensions; flat surface◇平面多边形 plane polygon; 平面几何(学) plane geometry; 平面精研机 surface lapping machine; 平面镜 [物理学] plane mirror; 平面磨床 [工业] surface-grinding machine;flat grinder;平面三角

复制尺寸:  duplicating racing

正交尺寸:  perpendicular dimension

调整尺寸:  einstellma gage dimension gage plate

尺寸单位:  dimensional unitdimensionless units

尺寸偏斜:  off square

孔径尺寸:  aperture sizeaperture skeletonhole size

尺寸相同:  measure alike

尺寸不合:  off sizeout of size

Example Sentences:

	1.	Recommendations for plan dimensions of unit loads 单位货物平面尺寸推荐标准
	2.	Computer - aided aircraft tolerance design of the planar dimension chain based on ug platform 的平面尺寸链的计算机辅助飞机公差设计
	3.	Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads 与1200mm 1000mm 1200mm 800mm托盘和成组载荷模数有关的刚性长方形运输包装的平面尺寸规范
	4.	The factors affecting the spatial effects of the deep foundation pit are researched in detail with the mutual deformation analysis method . these factors include the plane dimensions of pit , ring beam , middle beams , corner braces , embedded depth and brace stiffness . the results are compared with those of two - dimensional analysis , and their differences and adaptability are clarified 此外，本文还利用共同变形分析方法，对影响深基坑空间效应的诸多因素(包括基坑的平面尺寸效应、圈梁和腰梁效应、角撑效应、桩身插入深度和支撑刚度等)进行了深入探讨，并与目前常用的平面分析方法做了比较，指出了两者的区别及其适用性。
	5.	3 - wire strands with tensile strength of 1570 mpa were collocated in the lower precast concrete slabs of superposed floor . the manner of reinforcement lap and other detailing were brought forward . plane dimensions of the tested floor are 9m and 12m , and height is 180mm 本论文通过对前期试验的分析总结，选用1570mpa的三股钢绞线作预制底板的预应力钢筋，提出了合理的板侧横向钢筋搭接方式和其它构造措施，并按照现行规范设计并制作了试验结构，楼盖平面尺寸9 12m ，楼板厚度180mm 。
	6.	This paper introduces a new method of computer - aided analysis and calculation about dimension - chain , the new soft system of computer - aided analysis and calculation about dimension - chain based on this method , and current research of this soft system . it is discussed in detail how to establish the data structure , model and principle of the new soft system of computer - aided analysis and calculation about planar dimension - chain . because of its extensive application and underdeveloped research level in all kinds of enterprises , this paper establishes three kinds of solutions to various difficulties about analyzing and calculating dimension - chain using computer 本文介绍了一种新的尺寸链计算机辅助分析、解算方法，以及应用该新方法建立起来的一套应用软件系统和目前尺寸链计算机辅助分析、解算的研究现状与发展趋势，详细地论述了如何运用该新方法确立二维平面尺寸链计算机辅助分析、解算软件系统的模型、数据结构、模块分工以及具体软件功能实现等。
	7.	Referring to three kinds of plan irregularity , structures individually with four kinds of irregularity as eccentricity in one direction , eccentricities in two directions , re - entrant corner irregularity and diaphragm discontinuity have been analyzed to investigate the relationship between torsion effects and parameters of above irregular structures . the parameters and the schemes for determining the scope of structures with different kind of irregularity considering seismic action in two directions simultaneously are proposed , some conclusions have been get as following : it is indicated by the analysis results that torsion effect has no dependency relation with eccentric torsional angel adopted in code for seismic design for buildings . it is suggested that the eccentric torsional angel should not be take as the parameter of torsion effect of structures considering seismic action in two directions simultaneously ; for the structures with regular plan and elevation and with eccentricity in one direction due to irregular mass layout , the relative eccentricity can be take as the parameter of torsion effect of structures considering seismic action in two directions simultaneously ; for the structures with regular plan and elevation and with eccentricities in two directions due to irregular mass layout , the ratio of relative eccentricities in two directions and the angel of them can be take as the parameters of torsion effect of structures considering seismic action in two directions simultaneously ; it is indicated by the analysis results that the torsion effect has no dependency relation with re - entrant corner ratio adopted in code for seismic design for buildings as 所取得的主要结论有：结构的扭转效应与《抗震规范》所采用的扭转不规则指标即偏心扭转角之间的相关性较差，偏心扭转角不宜作为判断结构是否计及扭转效应及需考虑双向水平地震作用的界定指标；对于楼层间均匀偏心的多层单向偏心结构，建议采用相对偏心距作为需考虑双向水平地震作用的界定指标，并给出针对不同平面尺寸的界限相对偏心距；对于楼层间均匀偏心的多层双向偏心结构，建议采用两个主轴方向的相对偏心距及其夹角作为界定指标，结合单向偏心结构的界定方案进行需考虑双向水平地震作用的结构范围界定；凸凹不规则结构的扭转效应与凸凹比例无正相关关系， 《抗震规范》要求所有平面布置不对称的凸凹不规则结构计及扭转效应的规定欠妥当，建议凸凹不规则界限值从30改为15 ，只要求分析采用空间模型比较合适； 《抗震规范》关于有效楼板宽度较小的结构需计及扭转效应的规定很有必要，楼板局部不连续的结构需采用符合楼板实际刚度的计算模型予以分析，可使用相对偏心距（及其夹角）参照单向（和双向）偏心结构的界定方案，界定楼板局部不连续结构是否需要计入双向水平地震作用下的扭转效应。

Similar Words：

"平面承重结构" Chinese translation, "平面承重结构建筑物" Chinese translation, "平面齿轮" Chinese translation, "平面齿形带" Chinese translation, "平面尺" Chinese translation, "平面冲波" Chinese translation, "平面处理" Chinese translation, "平面处理工艺" Chinese translation, "平面处理优点" Chinese translation