| 1. | Impeller configuration is matched to the process conditions
搅拌桨结构与工艺条件相匹配。 |
| 2. | Corrosion and protection of stainless steel agitating blade of reactor
反应器不锈钢搅拌桨的腐蚀与防护 |
| 3. | Three - dimensional flow numerical simulation of double turbine impellers
双层涡轮搅拌桨三维流场数值模拟 |
| 4. | The mixing characteristics of parabola turbine used in biochemical engineering
型搅拌桨气液混合性能研究 |
| 5. | Power curve measurement and analysis for type of axial - flow stirrer
一种高效节能型轴流式搅拌桨功率曲线测定及分析 |
| 6. | The surface of propeller is divided as virtual module for the purpose of manufacture . 4
为设计/制造的方便，将搅拌桨的叶面、叶背划分为不同的虚拟模块。 |
| 7. | Mixer s dimension , paddle s type , speed , material and other parameters can be provide by consumers
可提供系列筒体直径系列搅拌桨形式不同转速及材质的搅拌器 |
| 8. | The propeller is belong to the thin - wall and jib - arm part , and it is needed to analyzing the strength and rigidity
从中找出流场的变化规律和最理想参数值。 5对搅拌桨进行结构动、静态分析。 |
| 9. | Wearable and anti - eroding coat is added after renewing the shape and dimensions to insure the life of mixer blade
修复后的搅拌桨叶是在恢复原有的形状后，表面再施加抗磨抗腐蚀耐磨涂层，确保搅拌桨的使用寿命。 |
| 10. | By the operational results , the optimum plan should be : 2 additional crystal seeding tanks and a single tank with section - changeable stiring paddle
根据运行结果，提出最佳配置方案为：增加2台品种槽，选用单菜单槽配变截面搅拌桨。 |
