| 1. | Testing method for transverse shear strength of glass fiber reinforced plastics
玻璃纤维增强塑料横向剪切强度的测试方法 |
| 2. | Transverse shearing test
横向剪切试验 |
| 3. | Transverse shear modulus
横向剪切模量 |
| 4. | Cross cut shears
横向剪切机 |
| 5. | Our collimation testers are lateral - shearing interferometers that can be used to examine and adjust the collimation of laser light
我们的剪切板准直度测量仪是用于检查和调整激光光束准直度的横向剪切干涉仪。 |
| 6. | The detection and reconstruction of wavefront by lateral shear interferometer ( lsi ) and hartmann wavefront sensor ( hws ) have been deduced analogically and simulated numerically
对横向剪切干涉仪和哈特曼波前传感器的波前探测和复原进行了类比推导和仿真计算。 |
| 7. | With this kind of element , panel flutter analysis can be performed not only for thin plates but for the middle - thickness laminates
由于min3单元计及了壁板的横向剪切效应，因此这种壁板颤振分析方法不仅可以针对薄板，而且可以针对具有中等厚度的复合材料层合板。 |
| 8. | It is shown that the ability of wavefront reconstruction of lsi is better than hws , for the indirect sampling information of wavefront with lsi is more than hws
结果表明，在相同输入波前、相同探测面元、相同拟合函数及阶数的情况下，横向剪切干涉仪的波前复原能力比哈特曼波前传感器强。 |
| 9. | 5 . the truss - arch model is brought up to analyze the shear capacity of columns within yield hinge regions . the shear contribution of concrete and transverse reinforcement , the response of various displacement ductility factors under cyclic load is described
本文还推导了框架柱塑性铰区域横向剪切变形计算公式，探讨了塑性铰区域剪切变形与弯曲变形成分随加载循环次数增加而变化的规律。 |
| 10. | The component of product ： this production line is mainly composed of charging wagon , single or double support uncoiler , transverse cutting machine , piling device and so on , meanwhile swing type mid - bridge , leveling draught device and deviation rectification device and so on are equipped between each machines
产品组成：该生产线主要由上料小车，单或双支撑开卷机，横向剪切机，堆垛装置等组成，同时在各机之间配有摆动式中间桥，校平牵引装置，纠偏装置等。 |
