Chinese translation for "啮合线"
|
- action line
contacting line
line of action
line of contact
line of engagement
path of contact
path of countact
pressure line
Related Translations:
啮合干涉: meshing interference 啮合端: end of engagementengaging end 脱离啮合: demeshingthrow out of gearthrow out of meshungear 啮合时限: gear-meshing time limit 蜗杆啮合: worm meshingworm toothing 啮合调节器: engagement controller 啮合特性: eingriffsverhalten engagement behavior 啮合电磁铁: clutch electromagnetclutch magnet 不啮合: not in meshout-of-gear
- Example Sentences:
| 1. | The meshing line of a pair of klingelnberg bevel gears
克林贝格锥齿轮的啮合线 | | 2. | Theoretical line of action
理论啮合线 | | 3. | Length of line of action
啮合线长度 | | 4. | Actual line of action
实际啮合线 | | 5. | It was pointed out that the actual center - line and theoretic meshing line of the paired gears varied in the form of planar motion due to the system vibration , and the actual meshing line was curvilinear
结果表明，由于系统振动的原因，齿轮副的实际中心线和理论啮合线是以平面运动方式变化的，实际啮合线（即啮合点的轨迹）是一条曲线。 | | 6. | By analyzing the vibration movement of the gear system , the actual center - line equation and that of the theoretic meshing line were derived in their vibration condition , and their movements and the modality of the actual meshing line was analytically verified
摘要根据齿轮系统的振动运动，建立了在振动条件下齿轮副实际中心线方程和理论啮合线方程，分析论证了实际中心线和理论啮合线的运动及实际啮合线的形态。 | | 7. | Taking into account thermal and non - newtonian effects of the lubricant , this paper has theoretically investigated elastohydrodynamic lubrication of involute spur gears , and achieved the pressure distribution , film shape , temperature distribution and the values of the friction coefficient and its varying law along the line of action of gear transmission
本文在考虑了润滑剂的热效应和非牛顿效应后，对渐开线直齿轮的弹流润滑问题进行了理论研究，获得了齿轮传动的压力分布、温度分布、油膜形状和齿面摩擦系数的取值范围及其沿齿轮传动啮合线的分布规律。 | | 8. | Firstly , the paper introduces the development and application of computer graphics & image technique , discusses the principle and method of cg and digital image processing , such as matrix of the graphic transformation , homogeneous reference frame , sampling and quantization of the image , file format of the image , template operation , etc . secondly the paper introduces the purpose and method of image enhancement processing , explains the each occasion of those methods such as threshold transformation , smoothing processing , sharpening processing , analyzes and contrasts the processing results of object image . thirdly , the paper introduces the method of mathematics morphologic , edge detection and thinning processing , attains character description of image and character dots of the contour . fourthly , the paper processes the coordinate transformation to character dots and basic splines fitting , imports correlative condition to devise meshing line and meshing track
本文首先介绍了计算机图形图像技术的发展与应用情况，对计算机图形学和数字图像处理的一些基本理论和方法如图形变换矩阵、齐次坐标系、图像采样和量化、图像文件格式、模板操作等内容进行了讨论：然后对图像增强处理的目的和方法进行了介绍，对诸如阀值变换、平滑处理、锐化处理等方法的应用场合进行了说明，并对实物图像的处理结果进行了分析与比较；接下来介绍了数学形态学方法、对增强后的图像进行边缘检测的方法和图像的特征描述方法，并获取轮廓的特征点：随后对获取的特征点进行坐标变换，并进行b样条曲线拟合，引入相关条件生成齿轮副的啮合线及啮合轨迹：最后引入等值线和区域填充表示方法，并以等值线和区域填充的形式对弧齿锥齿轮啮合仿真的载荷分布情况进行了直观的表示。 | | 9. | First , the basic theory of static load sharing mechanism has been presented , mainly including manufacturing and assembly error of each gear component ' s axis and each bearing ' s axis , gear size ( tooth thickness ) errors , simultaneous error of middle two - tooth . the formula of equivalent mesh error has been deduced , the load sharing coefficient has been computed . second , the influences of each error on the static load sharing coefficient have been discussed
首先，从静力学的角度研究了星型齿轮系统均载的基本原理；确定了影响齿轮系统均载特性的制造和安装误差，主要包括：各个齿轮构件的中心轴线制造和安装误差、轴承中心轴线的制造和安装误差、齿厚偏差、双联星轮同时啮合线误差；推导了这些误差的当量啮合误差的计算公式，分析了系统的均载特性。 |
- Similar Words：
- "啮合条件" Chinese translation, "啮合网络；纲目网络" Chinese translation, "啮合位置" Chinese translation, "啮合误差" Chinese translation, "啮合系数" Chinese translation, "啮合线长度" Chinese translation, "啮合销" Chinese translation, "啮合小齿轮" Chinese translation, "啮合小过梁" Chinese translation, "啮合校正" Chinese translation
|
|
|
